- No chemical mixing.
- No electro-chemical cassettes.
- Doses directly into pressurised lines.
- No high concentration solutions.
- No chlorinated by-products.
- No chlorine or excess acid.
- No residual chlorite in chlorine dioxide product stream.
- No storage of chlorine dioxide required.
- No additional booster equipment.
- Chlorine dioxide concentrations of less than 700 mg/litre.
- Instantaneous chlorine dioxide production in dilute solution.
The Cloxide Catalytic range of chlorine dioxide generator systems deliver ultra-pure chlorine dioxide from 100 gms up to 25,000 gms per day. The system uses:- Cloxide R - a modified sodium chlorite precursor for the generation of chlorine dioxide Regenerant S - sulphuric acid for regeneration of the ion-exchange columns. Please note that this product is only used for regeneration and is not involved in the production of chlorine dioxide. Catalytic Conversion Cartridge - a catalytic granular bed (Pt/Al 2O3) selected for high activity and fast conversion of chlorous acid to chlorine dioxide The chlorine dioxide output stream is delivered directly via a digital dosing injection system(s) on a proportional basis from either an impulse water meter or flow monitor. Clearwater ’s Total Management and Service Package ensures that all aspects of operating this chlorine dioxide system are undertaken by trained engineers including maintenance and chemical handling. Models Model | Chlorine Dioxide Output Range (gms/day) | Volume of Water Treated per Day at 1.0ppm Chlorine Dioxide | CC-DWW03G-005 | 114 to 227 | Up to 200 | CC-DWW03G-010 | 227 to 454 | Up to 450 | CC-DWW03G-025 | 454 to 1135 | Up to 1100 | CC-DWW03G-050 | 1135 to 2270 | Up to 2200 | CC-DWW03G-10 | 2270 to 4540 | Up to 4500 | CC-DWW03G-200 | 4540 to 9080 | Up to 9000 | Larger models to specification | Up to 22,700 | Up to 22,000 |
| Installation Electrical Requirements | 240V AC 10 Amp 50Hz (110 volt option available) | | Feed Water Quality | Potable Water | | Maximum TDS | 1,000 mg/litre as calcium carbonate | | Temperature Range | 40˚F to 100˚F (4˚C to 38˚C) | | Incoming Water Pressure | 40 psi to 100 psi (regulator fitted) | | Total Water Hardness | If the concentration of calcium carbonate is >170mg/litre we will supply a water softener specifically for the generator. for lower concentrations no softener is required. | | Drain for Regenerant | Must be atmospheric.
Air gap or tundish to prevent syphoning
pH 5.0 to 7.0 (to drain when inlet pH>6.5) | | Generator Size | Width = 840mm
Depth = 540mm
Height=1825mm | | Shipping Weight | | | Required Replacements (undertaken under contract by Clearwater trained personnel) | Conversion cartridge and filters every 2,000 operating hours. Ion exchange resin every two to three years |
For full technical and installation details please contact your local Clearwater chlorine dioxide product specialist.
|
Products >> 
