 A highly efficient low water volume chlorine dioxide generator. The system uses:- Cloxide R - a modified sodium chlorite precursor for the generation of chlorine dioxide. Catalytic Conversion Cartridge - a catalytic granular bed (Pt/Al2O3) selected for high activity and fast conversion of chlorous acid to chlorine dioxide. The Cloxide R is passed through an ion exchange column, forming chlorous acid. This then passes through the catalyst which assists the conversion of chlorous acid to chlorine dioxide. The end product is very pure chlorine dioxide. The chlorine dioxide output stream is delivered directly via a digital dosing injection system(s) on a proportional basis from either an impulse water meter or flow monitor. This system has no self regeneration capability. Upon exhaustion, the ion exchange columns are exchanged for regenerated columns. These are processed at our Clearwater regional centres. The unit is totally managed by a Clearwater Chlorine Dioxide Service Programme, making this an ideal unit for sites with limited engineering capabilities.
- No chemical mixing.
- No electro-chemical cassettes.
- Doses directly into pressurised lines.
- No high concentration solutions.
- No chlorinated by-products.
- No chlorine or excess acid.
- No residual chlorite in chlorine dioxide product stream.
- No storage of chlorine dioxide required.
- No additional booster equipment.
- Chlorine dioxide concentrations of <700mg/litre.
- Instantaneous chlorine dioxide production in dilute solution.
The Cloxide Catalytic range of chlorine dioxide generator systems deliver ultra-pure chlorine dioxide from 100 gms up to 25,000 gms per day.
Models Model | Chlorine Dioxide Output Range (gms/day) | Volume of Water Treated per Day at 1.0ppm Chlorine Dioxide | CCAT-EX2 | 35 | Up to 35 | CCAT-EX3 | 50 | Up to 50 | CCAT-EX4 | 65 | Up to 65 | Larger models to specification | Up to 100 | Up to 100 |
| Installation Electrical Requirements | 240V AC 10 Amp 50Hz (110 volt option available) | | Feed Water Quality | Potable Water | | Maximum TDS | 1,000 mg/litre as calcium carbonate | | Temperature Range | 40˚F to 100˚F ( 4˚C to 38 ˚C) | | Incoming Water Pressure | 40 psi to 100 psi (regulator fitted) | | Total Water Hardness | Will treat all water hardness levels without the need for a water softener | | Drain for Regenerant | None required | | Generator Size | Width = 1500mm
Depth = 350mm
Height=1500mm | | Shipping Weight | | | Required Replacements (undertaken under contract by Clearwater trained personnel) | Ion exchange columns on a monthly basis during routine monthly visit.
Conversion cartridge and filters every 2,000 operating hours.
Ion exchange resin every two to three years. | | Chemical Storage | The 25 litre drum of Cloxide R is located within the unit. The unit has an in-built integral bund. |
For full technical and installation details please contact your local Clearwater chlorine dioxide product specialist.
|
Products >> 
